Tjernlund Retail Store Tjernlund Retail Store

 
 

XCHANGER Reversible Basement Fans

Ventilate Damp, Musty Basements / Improve Indoor Air Quality

Many homes have basements that are stale, musty or smelly because of seasonal water issues, sump pits, floor drains or general lack of air exchange. The XchangeR Basement Fan is the economical and simple way to automatically ventilate your basement to eliminate odors and reduce humidity.

Also use the XchangeR to:

  • Exhaust musty air or air contaminated by wood off-gassing or radon
  • Supply fresh make up air in tight homes or for stoves and fireplaces
  • Ventilate hot garages, storage areas and workshops
  • Keep cabins and lake homes fresh
  • Dilute basement radon levels
Specifications for X2D and X2R
Number of Fans Operating Voltage Watts Amps CFM
1 120 VAC 36 0.3 90
2 120 VAC 72 0.6 180

 


Exhaust musty air, supply fresh air or position one fan in each direction for a balanced air exchange.

Easily flip ONE or BOTH fans to have them*:

  • Exhaust musty air or air contaminated by wood off-gassing or radon
     
  • Supply fresh make up air in tight homes or for stoves and fireplaces
     
  • Position one fan in each direction for balanced fresh air exchange

* All three orientations exceed ASHRAE 62.2-2007 Ventilation Air Requirements


Features of the X2D and X2R:

  • Ultra quiet dual fans for exhaust, supply or balanced air exchange
  • Simple plug-in electrical (6' cords) and very low power use
  • Installs through rim joist of 16" on center or greater floor joists or through wall

X2D
$329.95
 
X2R
$249.95
     

X2D includes the fans and hood all in one compact unit. Includes dehumidistat control and built-in dampers. Install X2D through a 12 ¼ x 5 ¼ inch opening in a basement rim joist or any outside wall. Plug fans into dehumidistat control and plug control into standard outlet. 

 

Use X2R in applications where outside hood must be located in a different room than the fans are installed in. Hang X2R from floor joist/truss or secure to wall. Install hood through  13 3/4" x 6 1/2" oval opening utilizing template and duct 6” flex to X2R collars on fan housing. The X2R does not include built-in dampers or a dehumidistat control so that it can be paired with the type of control that best fits the application.
 

X2D Unique Features:

  • Adjustable dehumidistat and separate on/off switches for each of the quiet 90 CFM fans
  • Built in dampers with settable stop to prevent unwanted air from entering your home
X2R Unique Features:
  • Hood separate from fans for installation flexibility
  • Fan assembly mounts from floor joist / truss or on wall in any orientation for ease of installation and flexibility
X2D Accessories
  • DT2-6 6" Duct Take-Off
  • SCP Speed Control
  • SWR Switch-It Wireless Outlet
X2R Accessories
  • DH2P Dehumidistat Control 
  • BD-6 6" Spring Return Back-draft Damper
  • DT2-6 6" Duct Take-Off
  • SCP Speed Control
  • SWR Switch-It Wireless Outlet

For less than the cost of a portable dehumidifier and at a fraction of the operating expense, reduce humidity levels and eliminate the musty smell in your basement by installing a Tjernlund XchangeR basement fan.

XchangeR Demonstration Video

Watch the XchangeR Demonstration
XCHANGER Animation Video

Watch the XchangeR Animation

     



Literature   |    X2D Instructions   |   X2R Instructions  |  Surveys: 1, 2, 3, 4, 5
  



 
SCP Duct Take Off Skytech 1315g Wireless Remote Control
SCP
Speed Control
DT2-6
6" Duct Take-Off
DH2P
Dehumidistat Control
(Included w/X2D)
SWR
Switch-It Wireless 120V Outlet
BD-Series
Back Draft Dampers
G-Series
Grilles

 

 

[footer_new.htm]